Professional-grade window film for residential, commercial, and automotive applications across Hawke's Bay. All films are professionally installed by iTint — ensuring correct application for maximum performance and longevity.
99% UV Block5G Signal SafeNano Ceramic TechnologyProfessional Installation
SL Series · Dual Reflective
SL05
Silver Mirror · 5% VLT
Full silver mirror — the boldest privacy film in the iTint range. SL05 uses a dual-ply metalised construction to deliver a polished chrome-like mirror finish from outside, maximum heat rejection, and near-total daytime privacy. Ideal for street-facing windows, ground-floor rooms, and commercial shopfronts where you want serious solar control with a striking reflective look.
Silver MirrorMax PrivacyResidentialCommercial
Visible Light Transmission
5%VLT
DarkClear
UV Block
99%
IR Reject
95%
TSER
94%
Core Performance
Visible Light Trans.
5.8%
Near-black interior view
UV Rejection
89%
Strong UV protection
IR Rejection
95%
780–2500nm range
Total Solar Rejected
94%
TSER measurement
Full Technical Specification
Property
Method
Value
Film Type
—
Dual Reflective Silver Mirror
Visible Light Transmittance (VLT)
IWFA / Solar Meter
5.8%
Visible Light Reflectance — Exterior
IWFA
High (polished silver)
Privacy Effect
Visual
One-way mirror (daylight dependent)
UV Radiation Rejection
300–380nm
89.3%
Infrared Energy Rejection (IRER)
780–2500nm
95.4%
Total Solar Energy Rejected (TSER)
IWFA
94%
Glare Reduction
Visual
~95%
Scratch Resistance
Pencil Hardness
Anti-scratch hard coat
Film Construction
—
Dual-ply metalised PET
Material Base
—
Optical-grade PET (Polyethylene Terephthalate)
Film Colour / Appearance
Visual
Polished silver / chrome mirror
Signal Interference
RF Test
Possible — metalised construction may reduce Wi-Fi/mobile signal
Safety Glass Retention
Impact
Yes
Double-Glazed Compatibility
—
Check with iTint — thermal stress risk on some Low-E units
Important — Daytime Privacy Only: Like all one-way mirror films, the SL05 relies on the outside being brighter than the inside. During daylight this creates a full mirror effect from outside. At night with interior lights on, the effect reverses — people outside can see in. Use curtains or blinds for night-time privacy.
Key Features
Polished silver mirror finish — striking chrome-like appearance from outside
Maximum solar control — rejects up to 94% of total solar energy, dramatically reducing room temperatures
Near-total daytime privacy — full one-way mirror effect in daylight conditions
99% UV block — protects skin, flooring, curtains, and furniture from UV fading
95–96% glare reduction — virtually eliminates harsh sun glare on screens and interiors
Dual-ply metalised construction for heavy-duty durability
Safety retention — holds glass fragments together on impact
Significantly reduces HVAC cooling costs in summer
Ideal Applications
Street-facing living rooms and bedrooms needing maximum daytime privacy
Commercial shopfronts and office glazing with heavy sun exposure
North and west-facing windows with severe heat gain
Ground-floor rooms on busy roads or close to neighbours
Any window where you want a bold reflective look with serious solar performance
XO Series · Nano Ceramic · Commercial Vehicle
XO05
Commercial Vehicle Privacy · 5% VLT
The tradie's tint. XO05 goes on the back of work utes, vans, and trucks — keeping tools out of sight, prying eyes out, and the cab cool. In New Zealand, commercial vehicles have no VLT limit on rear windows behind the driver, so you can go as dark as you want. At 5% VLT with nano-ceramic technology, XO05 delivers near-total privacy with 96% heat rejection and zero signal interference — your Bluetooth, GPS, and hands-free all work perfectly. Also the go-to for building windows that need blackout-level tinting.
NZ Vehicle Law: Commercial vehicles (utes, vans, trucks registered as goods-service) can legally go as dark as you want on all windows behind the driver. Passenger vehicles (sedans, hatches, SUVs, wagons) require 35% VLT on all windows — see XO35 for the legal passenger option. Nano-ceramic outperforms dyed film in every category and won't fade or bubble.
Key Features
Near-total privacy — nobody can see your tools, gear, or cargo through 5% VLT
Nano-ceramic technology — no dyes that fade, no metals that interfere with signals
96% total solar energy rejection — keeps the cab dramatically cooler in summer
99% UV block protects your interior, dashboard, and seats from sun damage
Zero signal interference — Bluetooth, GPS, hands-free, toll tags all work perfectly
Hard 3H scratch-resistant coating — built to handle tradie life
Also excellent for building windows needing blackout-level tinting
Ideal Applications
Rear and side windows on work utes, vans, and trucks (NZ legal for commercial vehicles)
Tradies and contractors — keep tools and equipment out of sight overnight
Fleet vehicles and service vans needing uniform dark tint
Server rooms, offices, and buildings requiring blackout-level privacy
West or north-facing residential windows with severe heat issues
XO Series · Nano Ceramic · Automotive Legal
XO35
NZ Legal Automotive Tint · 35% VLT
The car-legal nano-ceramic tint. 35% VLT is the darkest you can go on a passenger vehicle in New Zealand and still pass a WOF — and XO35 maxes out that limit with genuine nano-ceramic technology, not the cheap dyed film most shops use. Dyed films fade to purple, bubble in the sun, and lose performance within a couple of years. Nano-ceramic doesn't. Always ask if your tint is nano-ceramic — don't settle for anything less on your vehicle. Also a brilliant choice for residential and commercial glass.
Automotive Note: 35% VLT is the legal limit for all windows on NZ passenger vehicles (sedans, hatches, SUVs, wagons). XO35 is nano-ceramic — it won't fade, bubble, or turn purple like cheap dyed films. Always ask your tinter what technology they're using. If they can't tell you it's nano-ceramic, you're getting an inferior product.
Key Features
Nano-ceramic technology — won't fade, bubble, or turn purple like cheap dyed films
35% VLT — the darkest legal tint for NZ passenger vehicles, WOF compliant
99% UV block — protects your skin, dashboard, seats, and interior trim from UV damage
76% total solar energy rejection — keeps your car significantly cooler in summer
Zero signal interference — Wi-Fi, Bluetooth, GPS, mobile, and toll tags all work perfectly
No dye fading — ceramic particles are colour-stable for the life of the film
Also excellent for residential and commercial glass — the most installed VLT in homes
Ideal Applications
All windows on passenger cars, sedans, hatches, SUVs, and wagons (NZ WOF legal)
Front windscreen strip / eyebrow tint on any vehicle
Residential lounge, dining, and kitchen windows
Open-plan offices and meeting rooms
Schools, medical clinics, and retail shopfronts
XO Series · Nano Ceramic
XO70
Crystal Clear · 70% VLT
Maximum clarity with serious protection. XO70 transmits 70% of visible light — barely perceptible as tinted — while still rejecting 99% of UV radiation and 99% of infrared heat. The benchmark for nano ceramic performance in high-clarity applications. Ideal where you want full protection without any visible darkening of your glass.
Near-ClearUV ProtectionResidentialCommercial
Visible Light Transmission
70%VLT
DarkClear
UV Block
99%
IR Reject
99%
TSER
63%
Core Performance
Visible Light Trans.
70%
Near-clear appearance
UV Rejection
99%
Full spectrum UV block
IR Rejection
99%
780nm–2500nm range
Total Solar Rejected
63%
TSER measurement
Full Technical Specification
Property
Method
Value
Visible Light Transmittance (VLT)
IWFA / Solar Meter
70%
Visible Light Reflectance — Interior
IWFA
10%
Visible Light Reflectance — Exterior
IWFA
11%
UV Radiation Rejection
300–380nm
99%
Infrared Energy Rejection (IRER)
780–2500nm
99%
Total Solar Energy Rejected (TSER)
IWFA Endorsed
63%
Shading Coefficient
ISO 9050
0.52
Scratch Resistance
Pencil Hardness
3H
Film Thickness
Measured
2 mil / 50 µm
Film Technology
—
Tungsten Oxide + Titanium Nitride Nano Ceramic
Signal Interference
RF Test
None
Safety Glass Retention
Impact
Yes
Film Colour
Visual
Near-Clear / Slight Grey Tint
Colour Stability
Accelerated weathering
8 Years
Note: Performance data measured on 6mm clear float glass. At 70% VLT, this film sets a benchmark for nano ceramic clarity — delivering high UV and IR rejection with virtually no visible tint effect on most glass types.
Key Features
Industry benchmark for clear nano ceramic film — near-invisible appearance on most glass
Full 99% UV block — the same protection as darker films with almost no VLT impact
Still rejects 63% of total solar energy — meaningful comfort improvement in heat
Excellent for compliance with strata, council, or building codes limiting tint darkness
Ideal for north-facing windows that need protection without changing the home's look
Prevents UV-related fading of timber floors, carpets, and soft furnishings
Prolongs the life of leather furniture, artwork, and fabrics
Ideal Applications
Heritage homes and rentals where clear glass appearance must be maintained
Conservatories and sun rooms requiring full UV protection
Buildings with design restrictions on visible tint levels
Museums, galleries, retail — protecting goods from UV without reducing visibility
Any space where owners want UV/heat protection with zero visual impact
Decorative Series · Privacy Film
White Frost
Total Privacy · Diffused Light
White Frost is iTint's premium frosted privacy film — a sandblasted glass alternative that transforms clear panes into elegant, light-diffusing surfaces. It blocks direct line-of-sight in both directions while maintaining a bright, naturally-lit feel. Clean, timeless, and professional — it's the go-to solution for bathrooms, offices, and anywhere full visual privacy is needed without sacrificing light.
Total PrivacyLight DiffusionResidentialCommercial
Privacy Level
FROSTDiffused
Privacy
Full
UV Block
99%
Light (VLT)
22%
Core Performance
Privacy Level
Full
Blocks view both ways
Light Trans. (VLT)
22%
Soft diffused daylight
UV Rejection
99%
Full spectrum UV block
Total Solar Rejected
28%
TSER — decorative focus
Full Technical Specification
Property
Method
Value
Film Type
—
Frosted Decorative Privacy
Visible Light Transmittance (VLT)
Diffused
22%
Light Character
Visual
Soft, even diffusion — no harsh glare
Privacy — Daytime (exterior view)
Visual
Full — no direct view through
Privacy — Night-time (with interior light)
Visual
Full — no silhouettes visible
UV Radiation Rejection
300–380nm
99%
Infrared Energy Rejection (IRER)
780–2500nm
40%
Total Solar Energy Rejected (TSER)
IWFA
28%
Scratch Resistance
Pencil Hardness
3H
Film Thickness
Measured
3 mil / 75 µm
Film Colour / Appearance
Visual
Milky white / frosted glass effect
Surface Finish
Visual
Uniform matte — no streaks or patterns
Signal Interference
RF Test
None
Removal
—
Clean, residue-free removal possible
Privacy Note: White Frost provides full visual privacy in both directions, day and night. Unlike reflective films, privacy is not dependent on light conditions — it works equally whether interior or exterior light levels are higher.
Key Features
Complete privacy in both directions — no light-condition dependency like reflective films
Elegant frosted appearance — replicates sandblasted or acid-etched glass at a fraction of the cost
Maintains bright, open feel — transmits soft diffused light without harsh hotspots or glare
Full UV block — protects against UV-related fading and skin damage through frosted panes
Can be applied to full panes, or cut to custom shapes, bands, or patterned sections
Thicker 3 mil construction — improved safety retention compared to standard decorative films
Easy to clean and maintain with standard glass cleaning products
Ideal Applications
Bathroom windows, shower screens, and ensuite glazing
Office partitions, glass boardroom walls, and meeting room glazing
Front-door sidelights, entry glazing, and street-facing panes
Retail changing rooms, clinic consult rooms, and reception windows
Feature panels and decorative designs — bands, logos, custom patterns
BM Series · One-Way Mirror
BM12
Daytime Privacy · 12% VLT
iTint's flagship privacy film. BM12 creates a striking one-way mirror effect during daylight — from outside, your windows appear as a deep reflective surface; from inside, you enjoy full outward visibility. Paired with strong heat and UV performance, it's the ideal solution for street-facing living areas, bedrooms, and any space where privacy is essential without sacrificing the view.
Important — How One-Way Privacy Works: The mirror effect relies on a difference in light levels between inside and outside. During daylight, exterior light is stronger — the film reflects from outside while allowing interior vision. At night, when interior lighting is brighter than outside, this reverses and privacy is reduced. For full night-time privacy, use in combination with curtains or blinds.
Key Features
True one-way mirror effect during daylight — full outward view from inside, full privacy from outside
Striking reflective exterior finish — enhances kerb appeal with a clean, premium look
Strong heat performance — rejects 74% of total solar energy, significantly reducing room temperatures
Full UV block — same 99% UV protection regardless of tint shade
Deep 12% VLT for strong daytime privacy on busy streets or close neighbours
Reduces glare significantly — comfortable screen and TV viewing in bright conditions
Safety retention — holds glass together in the event of breakage
Ideal Applications
Street-facing living rooms, lounges, and dining areas
Ground-floor bedrooms with footpath or driveway exposure
Home offices on busy or overlooked sections
Rental properties — landlord-approved privacy upgrade without structural changes
Any residential window where daytime privacy matters most
Not sure which film is right?
Tell the Smart Quote chat what you're trying to solve — heat, glare, privacy, UV — and it'll recommend the best option for your windows.